Bolt deadbreak connector

3M 5810 Series Industrial loadbreak elbow kit is designed for connecting 5 - 15 kilo-Volts underground cable to transformers. Kit is used on tape shield, wire shield, unishield as well as jacketed concentric neutral types of power cables. It includes elbow body and the bushing insert, tin plated copper loadbreak probe with an ablative arc-follower tip, probe installation tool, silicone lubricant, cold shrink jacketing tube, three mastic strips, ground braid assembly, constant force spring, CC-3 cable cleaning pads, stainless steel reinforced pulling-eye and a capacitive test point, installation instructions. Loadbreak elbow is molded with high quality peroxide-cured EPDM insulation. Elbow kit has fully shielded and insulated plug-in separable connector. Kit can be used for cable insulation diameter range of - inches. It has a current rating of 200 Amps.

Kit can be used for connecting shielded power cables to loadbreak bushings. Elbow connector and bushing insert encompass the necessary components of all loadbreak connections. Aluminum crimp barrel is inertia-welded to a copper lug that ensures a reliable, tight, cool operating connection with the loadbreak probe. Elbow connector accepts 3/0 AWG - 250 kcmil stranded and 4/0 AWG - 250 kcmil compact/solid cables at 15 kilo-Volts with 100% insulation. Elbow connector accepts 250 kcmil stranded at 8 kilo-Volts, 2/0 - 4/0 AWG stranded and 3/0 AWG - 250 kcmil compact/solid at 15 kilo-Volts with 133% Insulation. Kit meets ANSI/IEEE standards.

Bolt deadbreak connector

bolt deadbreak connector

Media:

bolt deadbreak connectorbolt deadbreak connectorbolt deadbreak connectorbolt deadbreak connectorbolt deadbreak connector

http://buy-steroids.org